|
|
| |
| |
| Applications |
| |
 |
|
| |
 |
Stores |
| |
 |
Offices |
| |
 |
Restaurants and cafes |
| |
 |
Smokers' lounges |
| |
| |
|
|
|
| Documentation |
| |
| |
| |
|
|
| |
| Description |
| |
| |
| |
Heat recoverys fitted in galvanized steel boxes, white plastic coated, with a 25 mm thick double wall, class M0 fire proof thermal and acoustic insulation, configurable inlets and outlets, versions for horizontal installation and for vertical installation, intakes with a hermetic seal, F7 filter for inlet air (>80% filtration efficiency) and G4 filter for air extraction (>90% efficiency).
With two double inlet centrifugal fans with builtin motor.
CADB/T-D DP25 F7 Series
Heat recovery without additional heat added.
CADB/T-DI DP25 F7 Series
Heat recoverys with a heating resistance.
CADB/T-DC DP25 F7 Series
Heat recoverys with a built-in hot water coil.
Additional information
Single-phase (CADB) and three-phase (CADT) models.
Flows from 450 to 5,600 m3/h.
Horizontal and vertical versions, both with the possibility of a by-pass. |
| |
| Motors |
| |
| |
| |
IP20 (Ranges 05, 08, 18, 30). Class F.
IP55 (Range 45 and 56). Class F.
Interchangeable panels enabling multiple combinations. |
| |
| On request |
| |
| |
| |
Versions of the CADB-D and CADB-DI models with an electronic microprocessor that enables the fan speed to be controlled, the by-pass activated and an alarm for when the filters are dirty.
The versions with an electronic microprocessor in sizes 45 and 56 also incorporate a variable frequency drive.
IMPORTANT UPDATE TO THE RANGE
New standard configuration with a 25 mm thick double wall and F7 filters with low loss of load, manufactured in polypropylene, for inlet air and G4 manufactured in fibreglass for extraction. |
| |
 |
|
| Vertical construction |
| |
| Specific models for vertical installation. |
|
| |
| |
| |
 |
|
| Low noise level |
| |
| Internally lined with 25 mm M0 fire resistant acoustic insulation. |
|
| |
| |
| |
 |
|
| Easy to mount |
| |
| Single phase models integrated hanging supports to install the heat recovery unit. |
|
| |
| |
| |
 |
|
| Version with by pass |
| |
| Versions with by pass enabling 100% of the air to by pass the heat recovery (65% in singlephase versions). The by-pass works with a remotely activated servomotor with a manual switch (not included). |
|
| |
| |
| |
 |
|
| CADB-D and CADB-DI versions with an electronic microprocessor |
| |
| Versions that incorporate an electronic microprocessor that enables fan speed control, by-pass activation and filter dirty alarm. The versions with an electronic microprocessor in sizes 45 and 56 also incorporate a variable frequency drive. |
|
| |
| |
| |
 |
|
| 2 high-efficiency filters |
| |
| 2 filters: F7 filter for inlet air (filtration efficiency: >80%). G4 filter for extracted air (efficiency: >90%). |
|
| |
| |
| |
 |
|
| Airtight connectors |
| |
| Inlet and discharge circular duct connection flanges with integrated rubber air seal. |
|
| |
| |
| |
 |
|
| Robust construction |
| |
| High quality finishing with aluminium profile structure, providing a robust assembly. |
|
| |
| |
| |
 |
|
| Condensation drain |
| |
| Drain pipe to evacuate water from condensation. |
|
| |
| |
| |
 |
|
| Pressure sockets |
| |
| Pressure sockets before for clogging filter control. |
|
| |
| |
| |
 |
|
| External weatherproof terminal box |
| |
| IP55 terminal box located on the outside of the heat recovery casing for easy wiring access. |
|
| |
| |
| |
 |
|
| Configuration easy to modify |
| |
| The design of these heat recovery units enables them to be configured by the user on-site. The are multiple possibilities for changing the panels, enabling, in many cases, the positioning of the inlet and outlet connections directly at the work site according to specific requirements. |
|
| |
| |
| |
 |
|
|
| |
| |
| |
 |
|
| Easy maintenance |
| |
| Models CADB- 05 / 08 / 18 / 30: Rapid access to the filters from the bottom and sides. Easy access for cleaning the heat recovery from the bottom. |
|
| |
| |
| |
 |
|
|
| |
| |
| |
 |
|
|
| |
| |
| |
 |
|
|
| |
| |
| |
 |
|
|
| |
| Models CADT-45 and CADT-56: Rapid access to the filters from the top. It is also possible to access from the side and bottom. Easy access for cleaning the heat recovery from the top. |
|
| |
| |
| |
 |
|
|
| |
| |
| |
 |
|
|
|
| |
|
