|
|
| |
| |
| Applications |
| |
 |
Warehouses |
| |
 |
Workshops |
| |
 |
Commercial premises |
| |
 |
Parkings |
| |
 |
Agricultural extract or supply applications |
| |
 |
Greenhouses |
| |
 |
Painting Installations |
| |
 |
Air conditioning equipment |
| |
| |
|
|
|
| Documentation |
| |
| |
| |
|
|
| |
| Description |
| |
| |
| |
Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller.
The motor and fan impeller are supported within this mounting plate by strong electrowelded steel support frame.
All models include a steel finger guard as standard mounted to the inlet side of the fan. The whole fan assembly is protected against corrosion by cataforesis primer and a polyester black paint finish (1).
Available, depending upon the model, with single or three phase motors in 2, 4, 6, 8 or 12 poles.
(1) Models 800, 910 and 1000, fitted as standard with not painted motor-impeller. |
| |
| Motors |
| |
| |
| |
All the motors are IP54, Class F insulation, equipped with thermal protection.
Electrical supplies:
- Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box).
- Three phase 400V-50Hz. (250 model:
230/400V-50Hz).
All single phase models are speed controllable excepted /4-560, /4-630 and 710 models. All three phase models are speed controllable by Autotransformer excepted /4-560, /4-630 and models from 710 to 1000.
Models from Ø800 to Ø1000 are speed controllable by inverter.
|
| |
| Additional Information |
| |
| |
| |
Standard air direction: form (A) configuration (Motor over Impeller).
All models are supplied with a pre-wired wiring junction box located on the back of the motor hub for easy access wiring.
On request
Air direction: form (B) configuration (Impeller over Motor).
Three phase motors suitable for inverter control. (E22 version) |
| |
 |
|
| Compact design |
| |
| This very low profile design optimises airflow performances whilst minimising noise generation |
|
| |
| |
| |
 |
|
| Corrosion resistance |
| |
| Mounting plate, motor support and finger proof guard protected by cataforesis primer and black polyester paint finish. Stainless steel screws |
|
| |
| |
| |
 |
|
| Terminal box |
| |
| Wiring terminal box with cable gland PG-11 (M20: from 800 to 1000 models) |
|
| |
| |
| |
 |
|
| High efficiency "Sickle blade" impeller |
| |
| "Sickle Blade" impeller specifically designed to ensure the highest and most efficient airflow performance with the lowest noise level. Dynamically balanced to ISO 1940 standard. Manufactured from aluminium plate, except from 250 to 355 models which are manufactured from pressed sheet steel |
|
|
| |
|
